Using the IL-TEM Technique to Understand the Mechanism and Improve the Durability of Platinum Cathode Catalysts for Proton-Exchange Membrane Fuel Cells.

Proton-exchange membrane fuel cells are one of the most promising energy conversion technologies for both automotive and stationary applications. Scientists are testing a number of solutions to increase the durability of cells, especially catalysts, which are the most expensive component. These solutions include, among others, the modification of the composition and morphology of supported nanoparticles, the platinum-support interface, and the support itself. A detailed understanding of the mechanism of platinum degradation and the subsequent improvement of the durability of the entire cell requires the development of methods for effectively monitoring the behavior of catalytic nanoparticles under various cell operating conditions. The Identical-Location Transmission Electron Microscopy (IL-TEM) method makes it possible to visually track structural and morphological changes in the catalyst directly. Because the tests are performed with a liquid electrolyte imitating a membrane, they provide better control of the degradation conditions and, consequently, facilitate the understanding of nanoparticle degradation processes in various operating conditions. This review is primarily intended to disseminate knowledge about this technique to scientists using electron microscopy in the study of energy materials and to draw attention to issues related to the characterization of the structure of carbon supports.

Control of monomeric Vo's versus Vo clusters in ZrO2-x for solar-light H2 production from H2O at high-yield (millimoles gr-1 h-1).

Pristine zirconia, ZrO2, possesses high premise as photocatalyst due to its conduction band energy edge. However, its high energy-gap is prohibitive for photoactivation by solar-light. Currently, it is unclear how solar-active zirconia can be designed to meet the requirements for high photocatalytic performance. Moreover, transferring this design to an industrial-scale process is a forward-looking route. Herein, we have developed a novel Flame Spray Pyrolysis process for generating solar-light active nano-ZrO2-x via engineering of lattice vacancies, Vo. Using solar photons, our optimal nano-ZrO2-x can achieve milestone H2-production yield, > 2400 µmolg-1 h-1 (closest thus, so far, to high photocatalytic water splitting performance benchmarks). Visible light can be also exploited by nano-ZrO2-x at a high yield via a two-photon process. Control of monomeric Vo versus clusters of Vo's is the key parameter toward Highly-Performing-Photocatalytic ZrO2-x. Thus, the reusable and sustainable ZrO2-x catalyst achieves so far unattainable solar activated photocatalysis, under large scale production.

C60ThSe2/ITO interface formation: photoemission-based charge-transfer recognition for organic electronics applications.

Within the presented work, we propose a complex photoemission-based approach for the investigation of the C60ThSe2 dyad (C60ThSe2)/indium-tin oxide (ITO) interface formation. For surface topography and basic morphology determination, atomic force microscopy was utilized, and the results showed that C60ThSe2 agglomerated into close-to-spherical crystallites and the island-like growth was the dominant type for fullerene growth on the ITO substrate. Further, detailed X-ray and UV-photoelectron spectroscopies (XPS, UPS) were used for thorough characterization of the chemical and electronic properties of the investigated structures. Experiments were conducted by means of cyclic voltammetry and UV-VIS techniques for both deposition purposes and for determination of the basic electronic structure. As a result, we present the detailed characterization of the chemical and energy structures with a clear designation of the mutual influence of both materials on their counterparts. Among others, the accurate photoemission signal decomposition of the overlapping signals was done with respect to obtaining the energy-related information depth. The obtained data clearly showed that an interface dipole (0.56 eV) was created between the ITO substrate and organic overlayer at the ultrathin coverage stage. Since our results point out the most probable charge-carrier relocation in the vicinity of the interface, this together with the dipole existence should be taken into account while creating energy-level cascades for various (e.g., photovoltaic or organic electronic) applications. The work may also provide insights for engineers working with a vast range of organic-based electronics while designing devices based on fullerene/ITO hybrid structures.

Chemical and Electronic Structure Characterization of Electrochemically Deposited Nickel Tetraamino-phthalocyanine: A Step toward More Efficient Deposition Techniques for Organic Electronics Application.

Phthalocyanines (Pc), with or without metal ligands, are still of high research interest, mainly for the application in organic electronics. Because of rather low solubility, Pc-based films are commonly deposited applying various advanced and demanding vacuum techniques, like physical vapor deposition (PVD). In this work, an alternative straightforward approach of NiPc layer formation is proposed in which NH2-side groups of nickel(II) tetraamino-phthalocyanine (AmNiPc) are engaged in the process of electrochemical deposition of (AmNiPc)layer on indium-tin oxide (ITO) substrates. The resulting layer is widely investigated by cyclic voltammetry, atomic force microscopy, UV-vis, and ATR-IR spectroscopies, X-ray diffraction, and photoemission techniques: X-ray and UV-photoelectron spectroscopies. The chemical and electronic structure of (AmNiPc)layer is characterized. It is shown that the electronic properties of the formed (AmNiPc)layer/ITO hybrid correspond to the ones previously reported for PVD-NiPc films.

Flame Spray Pyrolysis Co3O4/CoO as Highly-Efficient Nanocatalyst for Oxygen Reduction Reaction.

The oxygen reduction reaction (ORR) is the rate-limiting reaction in the cathode side of fuel cells. In the quest for alternatives to Pt-electrodes as cathodes in ORR, appropriate transition metal oxide-based electrocatalysts are needed. In the present work, we have synthesized Co3O4 and CoO/Co3O4 nanostructures using flame spray pyrolysis (FSP), as electrocatalysts for ORR in acidic and alkaline media. A detailed study of the effect of (Co-oxide)/Pt ratio on ORR efficiency shows that the present FSP-made Co-oxides are able to perform ORR at very low-Pt loading, 0.4% of total metal content. In acid medium, an electrode with (5.2% Pt + 4.8% Co3O4), achieved the highest ORR performance (Jmax = 8.31 mA/cm2, E1/2 = 0.66 V). In alkaline medium, superior performance and stability have been achieved by an electrode with (0.4%Pt + 9.6% (CoO/Co3O4)) with ORR activity (Jmax = 3.5 mA/cm2, E1/2 = 0.08 V). Using XRD, XPS, Raman and TEM data, we discuss the structural and electronic aspects of the FSP-made Co-oxide catalysts in relation to the ORR performance. Cyclic voltammetry data indicate that the ORR process involves active sites associated with Co3+ cations at the cobalt oxide surface. Technology-wise, the present work demonstrates that the developed FSP-protocols, constitutes a novel scalable process for production of co-oxides appropriate for oxygen reduction reaction electrodes.